Guide To Flash Rom On Bricked / Bootloop Micromax Bolt S301 Run On Spreadtrum Chipset.

Install Stock Rom Micromax Bolt S301. (This guide just for Micromax Bolt S301) Guidebelajar on this guide will explain to you how to flashing android device on Micromax Bolt S301 with easy and simple step. Micromax Bolt S301 comes with IPS LCD capacitive touchscreen 16 M colors, 3,5 Inches wides, Android OS, v4.4.4 (KitKat), upgradable to v5.0.2 (Lollipop) and supported with Qualcomm MSM8939 Snapdragon 615 chipset, Quad-core 1 GHz CPU, combined with 512 MB of RAM as their engine. And you can enjoy exciting 1,3 MP on main camera, and VGA on secondary camera. And this devices released 2015, June.

Flash Bricked / Bootloop Micromax Bolt S301.

Flashing in android is the same way like fresh install on the windows PC, So by perform a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failed to install Stock ROM Mod.

Do you know what is bootloop, Ok.. now I will explain to you what si bootloop. Some people say that bootloop is a problem that occured on an android system which the android system could not start up going to the homescreen menu. And its happened is automatically return to the initial state on the first time when you turn on the Micromax Bolt S301. And the device will stop to display on the smartphone logo. 

Now, follow the isntruction list bellow, do it with your own risk.

Prepare Flash Micromax Bolt S301.

1. A computer with windows OS,
2. Original USB Cable Micromax Bolt S301
3. MTK Driver_Auto_Installer_v5.1453.03, Here
4. SPFlash Tool for windows Here (you must be a registered user)


5. Stock Rom Lollipop For Micromax Bolt S301. Here 
6. To ensure what is firmware used by your device now, you can check by go to Setting ->About -> Sof tware Information ->Build Number.
7. Flashing & Servicing must be undertaken by qualified personnel only. 

Guide To Flash Micromax Bolt S301 On Spreadtrum Chipset Using .Pac File.

This is step to flash Android Smartphone Run On Spreadtrum Chipset Using .Pac File,

1. You need a computer with windows OS
2. Turn Off your android device.
3. Download appropriate Spreadtrum USB Driver for your android devices.(If needed), here
4. After you finish download spreadtrum USB driver, now install it on your computer. (you can skip this step if this driver already installed)


5. Download latest SPD Upgrade Tool sometimes this tool called with Spreadtrum Flash Tool. (Spreadtrum Upgrade tool R.2.9.2015) or you can find this tool on package.
6. When download is done. extract this tool on spesified folder on your computer.
7. After this tool extracted, you will able to see picture like shown below.

   

   Spreadtrum upgrade tool

8. Then, Double click on upgradedownload.exe to open Spreadtrum Flash Tool.

   

   Spreadtrum upgrade tool

9. When this tool is launched, now connect your android smartphone to your computer .

   

   Spreadtrum upgrade tool

10. Once your android is successfully connected to your computer, Now click load packe d button to add .Pac file (this is firmware or stock rom that comes as .pac).
    
    

    

    Spreadtrum upgrade tool

11. When you have successfully added the .Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

    

    Spreadtrum upgrade tool

12. During the flashing process your device will restart au tomatically.

    

    Spreadtrum upgrade tool

13. Once flashing your android is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

    

    Spreadtrum upgrade tool

14. Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
15. To check your new firmware, you can go to settings -> About Phone ->Check Firmware