Guide To Flash or Install Stock Rom On Bricked / Bootloop Micromax Bolt D303.

Install Stock Rom Micromax Bolt D303. (This guide just for Micromax Bolt D303) Guidebelajar on this guide will explain to you how to flashing android device on Micromax Bolt D303 with easy and simple step. Micromax Bolt D303 comes with IPS LCD capacitive touchscreen 16 M colors, 4,0 Inches wides, Android OS, v4.4.2 (KitKat) and supported with Mediatek MT6572 chipset, Dual-core 1.3 GHz CPU, combined with 512 MB of RAM as their engine. And you can enjoy exciting 3 MP on main camera, and VGA on secondary camera. And this devices released 2015, July.

Install Stock Rom On Bricked/Bootloop Micromax Bolt D303.

Flashing in andr oid is the same way like fresh install on the windows PC, So by perform a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failed to install Stock ROM Mod.

Do you know what is bootloop, Ok.. now I will explain to you what si bootloop. Some people say that bootloop is a problem that occured on an android system which the android system could not start up going to the homescreen menu. And its happened is automatically return to the initial state on the first time when you turn on the Micromax Bolt D303. And the device will stop to display on the smartphone logo. 

Now, follow the isntruction list bellow, do it with your own risk.

Prepare Flash Micromax Bolt D303.

1. A computer with windows OS,
2. Original USB Cable Micromax Bolt D303


3. MTK Driver_Auto_Installer_v5.1453.03, Here
4. SPFlash Tool for windows Here (you must be a registered user)
5. Stock Rom Lollipop For Micromax Bolt D303. Here 
6. To ensure what is firmware used by your device now, you can check by go to Setting ->About -> Software Information ->Build Number.

Flashing Micromax Bolt D303.

1. At the first time,download the linked file from above. 
2. If your Micr omax Bolt D303 in normal condition, Power Off now
3. But, If your device in bootloop state, you can try reboot to stock recovery by pressing both volume up and power button, then press power down option to turn off your phone.
4. Remove battery from your phone.
5. Extract and install MTK Driver_Auto_Installer_v5.1453.03.
6. Then extract SPFlash Tool for windows, and run as administrator on flashtool.exe
7. Once SP Flashtool is launched, click on the download tab.
   

   

   sp flash tool - download tab

8. Then click scatter load. find Micromax Bolt D303 scatter storage location earlier. (the scatter file can be found by extracting Micromax Bolt D303 stock rom lollipop.rar)
9. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select scatter.txt 
   
   

   

   Install Stock Rom Micromax Bolt D303.

10. Then yo u click options ->Download -> then check DA DL all with checksum.

    

    Install Stock Rom Micromax Bolt D303.

11. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

    

    Install Stock Rom Micromax Bolt D303.

12. Then, click download button on top right and connect your Micromax Bolt D303 with USB cable in phone switch off position.

    Install Stock Rom Micromax Bolt D303.

13. Process will run automatic, and you can see the red stripe showing download percentage at bellow
14. When your process complete, you can see a green circle with tick mark. 

    

    Install Stock Rom Micromax Bolt D303.

15. Now disconnect your Micromax Bolt D303
16. Install you battery again. 
17. Then, start your Micromax Bolt D303. (remember, on the first booting it will take a long time to start)
18. When everything complete you must go to settings and do a factory data reset, this will make your phone go f aster and becomes normal.
19. Success. enjoy